Reinforcing Mesh

Cold Rolled, High Strength Fabric of Grade R500N

ARC produces a 500 MPa Ductility Grade N mesh to suit your project requirements. The DuctileMesh 500^™ fabric sheets are a welded square or rectangular grid of R500N bars.

Contact your local ARC branch to discuss your project requirements for Ductility Grade N mesh.

Cold Rolled, High Strength Deformed Fabric of Grade D500L

ARC fabric is available in 2.4 x 6.0 metre sheets and in 2.4 metre wide rolls. It is also available in purpose made sheets to suit your project requirements. The mesh sheets are a welded square or rectangular grid of D500L bars.

Welded fabric permits maximum construction speed and economies. The cost and time required to lay mesh sheets is much less than that required to place, space and tie together loose bars. Typically fabric also provides greater crack control than loose bars as the bars that make up the sheet are of smaller diameter and at closer spacings.

ARC fabric is commonly available in sheet sizes ranging from SL42 to RL1218 and in trench mesh strips from L8TM3 to L12TM5.

Cross-Sectional Area of ARC Mesh

Physical Dimensions of ARC Mesh

Mesh Design Information

Wire and Fabric Development Length

Mesh Detailing

Rust and Protective Coatings